GRANKIA GHS10K 48v mppt hybrid 3 phase solar inverter charger 10kw combines solar system, AC utility, and battery power source to supply continuous power. It is self-consumption and feed power into the grid.
GHS10K 48v 3 phase solar inverter charger 10kw can run without battery backup. It is suitable for remote areas where the cost of the utility bill is too high or emergency usage when utility is not stable. It can operate as an off-grid inverter to provide continuous power even without the grid.
3 Phase Solar Inverter 10KW Features
- Pure sine wave output
- High PV Input voltage range
- Programmable multiple operations: Grid tie, Off grid, and grid-tie with backup
- Built-in 2 Strings MPP trackers
- LCD display panel for comprehensive information
- User-adjustable battery charging current and voltage
- Self-consumption and Feed-in to the grid
- Programmable supply priority for PV, Battery or Grid
- Multiple communication for USB, RS-232, dry contact
- Built-in Timer for various mode of on/off operation
- Monitoring software for real time status display and control
- Parallel operation up to 6 units
Hybrid Solar Inverter 10KW Data
| Model | GHS10K |
| PHASE | 3-phase in/3-phase out |
| Max. PV INPUT POWER | 14850W |
| Rated Output Power | 10000W |
| Maximum Charging Power | 9600W |
| Dimension, D x W x H (mm) | 168 x 500 x 622 |
| Net weight (kgs) | 40 |
| GRID-TIE OPERATION | |
| PV INPUT (DC) | |
| Nominal DC Voltage/Max. DC Voltage | 720VDC/900VDC |
| Start-up Voltage/Initial Feeding Voltage | 320VDC/350VDC |
| MPP Voltage Range | 400VDC~800VDC |
| Number of MPP Trackers/Max. Input Current | 2/2×18.6A |
| GRID OUTPUT (AC) | |
| Nominal Output Voltage | 230VAC (P-N) / 400VAC (P-P) |
| Output Voltage Range | 184VAC – 265VAC* per phase |
| Nominal Output Current | 14.5A per phase |
| Power Factor | >0.99 |
| EFFICIENCY | |
| Maximum Conversion Efficiency (DC/AC) | 96% |
| European Efficiency@Vnominal | 95% |
| OFF-GRID OPERATION | |
| AC INPUT | |
| AC start-up Voltage / Auto Restart Voltage | 120VAC – 140VAC per phase/180 VAC per phase |
| Acceptable Input Voltage Range | 170VAC – 280VAC per phase |
| Max. AC Input Current | 40A |
| PV INPUT (DC) | |
| Max. DC Voltage | 900VDC |
| MPP Voltage Range | 400VDC~800VDC |
| Number of MPP Trackers/Max. Input Current | 2/2×18.6A |
| BATTERY Mode Output (AC) | |
| Nominal Output Voltage | 230VAC (P-N) / 400 VAC (P-P) |
| Output Waveform | Pure Sine Wave |
| Efficiency (DC to AC) | 91% |
| HYBRID OPERATION | |
| PV INPUT (DC) | |
| Nominal DC Voltage/Max. DC Voltage | 720VDC / 900VDC |
| Start-up Voltage/Initial Feeding Voltage | 320VDC / 350VDC |
| MPP Voltage Range | 400VDC~800VDC |
| Number of MPP Trackers/Max. Input Current | 2/2×18.6A |
| GRID OUTOUT (AC) | |
| Nominal Output Voltage | 230VAC (P-N) / 400 VAC (P-P) |
| Output Voltage Range | 184VAC – 264.5 VAC* per phase |
| Nominal Output Current | 14.5A per phase |
| AC INPUT | |
| AC Start-up Voltage/Auto Restart Voltage | 120VAC -140VAC per phase/ 180 VAC per phase |
| Acceptable Input Voltage Range | 170VAC – 280VAC per phase |
| Max. AC Input Current | 40A |
| BATTERY MODE OUTPUT (AC) | |
| Nominal Output Voltage | 230VAC (P-N) / 400 VAC(P-P) |
| Efficiency (DC to AC) | 91% |
| BATTERY& CHARGER | |
| Nominal DC Voltage | 48VDC |
| Max. Charging Current | Default 60A, 10A-200A (Adjustable) |
| INTERFACE | |
| Communication Port | RS-232/USB and CAN Interface |
| Intelligent Slot | Optional SNMP, Modbus and AS-400 cards available |
| ENVIRONMENT | |
| Humidity | 0~90% RH (Non-condensing) |
| Operating Temperature | -10 to 55 °C |
| Altitude | 0-1000 m** |
*These figures may vary depending on different AC voltage and country requirements.
**Power derating 1% every 100m when altitude is over 1000m.
Hybrid Solar Inverter Product Overview
1. PV connectors 10. Operation buttons
2. AC Grid connectors 11. Dry contact
3. Battery connectors 12. Battery thermal sensor
4. AC output connectors 13. EPO
5. RS-232 communication port 14. AC circuit breaker
6. USB communication port 15. DC Switch
7. Intelligent slot 16. Relay control port
8. Grounding 17. Parallel communication port
9. LCD display panel 18. Current sharing port
Solar Inverter 10KW Diagram
Hybrid Inverter Software Setting
Solar Inverter 48V - Grid Tie Setting
Hybrid Solar Inverter - Grid Tie with Backup Setting
Hybrid Inverter - Off grid Setting
Inverter FAQ
What is hybrid mode in inverter?
Hybrid mode - Stores excess solar energy during the day to be used in the evening to increase self-sufficiency. Backup mode - Functions like a normal solar inverter when the grid is connected and automatically switches to backup power mode during a grid outage.
Can I use hybrid inverter without grid?
An off-grid inverter can work with an off-grid solar system as it needs enough space to store energy for at least two days. Similarly, hybrid system inverters use hybrid grid connectors. The battery needs to be large enough to supply 5 to 10 hours of energy based on the application.
Can hybrid inverter run without battery?
A hybrid solar inverter can work without batteries. This type of system is attached to solar panels and to the power grid which supplies power from both.
The Articles You may Like
- Solar inverter – Wikipedia
- How to choose your best mppt solar charge controller
- How does an uninterruptible power supply ups work?
- What are the different types of ups uninterruptible power supply?
- CMR10048 mppt solar charge controller 100a